The GSI Bullet Feed Systems for RL1050 & Super 1050 Reloading Machines include the GSI Rotary Bullet Feeder, the GSI 1050 Toolhead & a kit for relocating the case feeder to the rest of your 1050 reloaders. The GSI Bullet Feeder mounts directly into the left side of the 1050 toolhead. We have several changes shown here. We have removed all the parts mounted on the left side of the 1050 machine. A new CF Mounting Post & Feed Tube are included with the new system. The Gas Spring mounted to the rear of the toolhead compensates for added weight the bullets and feeder place on the toolhead and machines operation. The GSI Bullet Feeder uses a DC Electric Motor to rotate the hopper ring counterclockwise, the hopper ring then picks up bullets "Nose First" in the bottom of the bowl and delivers the correctly oriented bullets to the top of the hopper where they exit and travel down the bullet guide column. A micro switch on the column regulates the operation of the feeder as needed to keep the column full of bullets. Current Models Available: 9MM / 38 Super to feed: FMJ, JHP Bullets, Copper Plated Bullets 38 / 357 Cal. to feed: FMJ, JHP, Jacketed SP Bullets, Copper Plated Bullets   40 Cal. to feed: FMJ, JHP, Trun Bullets, Copper Plated Bullets.   45 ACP to feed: FMJ, JHP Bullets, Copper Plated Bullets.   Power Supply Average Bullet Capacity 110 VAC. Input / 12 VDC 1.2 amp output 60HZ - USA - _____________________________ 220 VAC Input / 12 VDC 1.2 amp output 50 HZ - Europe - 9MM = 250 _______________________ 40 Caliber = 150 ______________________ 45 ACP = 150 Technical Data Precision machined Aluminum w/ Hard Black Anodized Finish. Accepts standard 7/8-14 dies in stations 2, 3, 5, 6 & 8. In station 4 we install the GSI Seating Stem. The Integrated Feed Mechanism transfers the motion of the platform to rotate the bullet feed wheel counter clockwise, delivering bullets ready for seating in to the case. The GSI Toolhead fits both RL1050 machines & Super 1050 machines. Accepts the standard toolhead parts; CF Cam, Primer Pushrod & Rachet Cam & Hardware. Spare toolhead assemblies can be ordered when you use the rotary hopper with similar calibers.